Skip to Main Content

Charter Oak Automation

CNC Controlled Machinery for Industrial and Serious Hobbyists

Charter Oak Automation
340 Quinnipiac Street
Building 19
Wallingford, CT 06492
(203) 562-0699
support@charteroakautomation.com

Home » Moving Sale!

Moving Sale!

To keep up with the ever-growing demand for our products, Charter Oak Automation is moving to larger premises in the next few weeks. With triple the shop floor and warehouse space, we’re looking forward to expanding our offerings and streamlining our production facility.

If you’ve been waiting to purchase new equipment, now is the perfect time to take advantage of our moving sale. Every mill and lathe we sell is one less we’ll have to move, so help us out while saving money at the same time!

SyiL AEX250 CNC Lathe

SyiL AEX250 CNC Lathe
Old Price: $14,990
New Price: $14,495
Controller: Siemens 808D CNC controller
Max Turning Diameter: 9.8″ (250 mm)
Max Machining Length: 17.7″ (450 mm)
Spindle Bore Diameter: 0.8″ (21 mm)
Travel Dimensions (XZ): 7″ × 12.6″ (180 mm × 320 mm)
Max Feed Rate (XZ): 393.7 in/s (10,000 mm/s)
XZ Axis Motors: Yaskawa servos
XZ Axis Motor Torque: 2.4 N•m (1.77 ft•lb)
Spindle Speed: 100 to 3,000 RPM
Linear Actuators: PMI Double-nut ball screws
Repeatable Accuracy: ≤ 10 µm (0.01 mm)
Enclosure/Stand Style: Fully enclosed
Tool Holding: 4-position computer-controlled turret
Oiling System: Automatic lubricator
Input/Output: USB, RS232, pendant (included)
Dimensions (L × W × H): 41″ × 49″ × 67″
Safety Certifications: CE and CCC

SyiL X5 Pro CNC Mill

SyiL X5 Pro CNC Mill
Old Price: $9,150
New Price: $8,995
Table Size: 20.5″ × 6.3″
Travel Dimensions (XYZ): 11″ × 6.3″ × 6.7″
Spindle Speed: 200 to 5,000 RPM
Spindle Power: 1.5 HP (1.1 kW)
Linear Actuators: P5-grade PMI double-nut ball screws
Slide Style: HIWIN Linear ways
Positional Accuracy: ≤ 10µm (0.01 mm)
Enclosure/Stand Style: Fully enclosed
Power Requirements: 220V AC single phase
Oiling System: Automatic lubricator
Axis Configuration: 3-axis, 4th axis interface preinstalled
Safety Certifications: CE and CCC

Syil X5

SyiL X5 CNC Mill
Old Price: $7,695
New Price: $7,495
Table Size: 21.6″ x 6.3″
Travel Dimensions (XYZ): 11″ × 5.3″ × 10.6″
Spindle Speed: 200 to 5,000 RPM
Spindle Power: 1.5 HP (1.1 kW)
Linear Actuators: P5-grade PMI double-nut ball screws
Slide Style: HIWIN Linear ways
Repeatability: 0.0004″
Enclosure/Stand Style: Stand
Power Requirements: 220V AC single phase
Oiling System: Automatic lubricator
Axis Configuration: 3-axis, 4th axis interface preinstalled
Safety Certifications: CE and CCC

Manual Lathe

COA1224G Manual Gap-Bed Lathe
Product Details Page
Inches (Approx.) Metric
Old Price (w/ Stand and Accessories): $2,595
New Price (w/ Stand and Accessories): $2,395
Swing over Bed (φ): 12″ 305 mm
Swing over Carriage (φ): 6.8″ 173 mm
Swing over Gap (φ): 17.3″ 440 mm
Length of Gap: 7.7″ 195 mm
Width of Ways: 7.1″ 182 mm
Total Length of Ways: 35.4″ 900 mm
Distance between Centers: 24″ 610 mm
Saddle Travel: 20″ 510 mm
Cross Travel: 5.9″ 150 mm
Compound Travel: 3.5″ 90 mm
Barrel Travel: 3.9″ 100 mm
Barrel Diameter (φ): 1¼” 32 mm
Approx. Min. Feed Rate (per Rev.): 0.0047″ 0.12 mm
Approx. Max. Feed Rate (per Rev.): 0.0165″ 0.42 mm
Spindle Bore: 1.5″ 38 mm
Spindle Taper: MT5
Center Taper: MT3
Feed Speeds (RPM): 64, 130, 210, 380, 460, 790, 940, 1300, 1500
Inch Thread Settings: 40
Inch Thread Range (TPI): 4 to 112
Metric Thread Settings: 11
Metric Thread Range (mm): 0.25 to 7.5
Lathe Dimensions (L × W × H): 55.9″ × 29.5″ × 29.9″ 1420 × 750 × 760 mm
Lathe Weight: 838-948 lb. 380-430 kg
Stand Weight: 132-143 lb. 60-65 kg
Power Requirements: 220V single-phase 60 Hz
Amperage: 7.2 amps
Tool Holder: Four-way turret tool post
Way Finish: Hardened and ground
Feed Gear Selector: Closed box
On-Carriage Controls: On/off, forward/reverse
Included Accessories
  • Stand with storage shelves and chip tray
  • 9.6″ (245 mm) faceplate
  • 8″ (203 mm) 4-jaw independent chuck
  • 6″ (152 mm) 3-jaw chuck
  • Extra jaws for outer diameter workholding with the 3-jaw chuck
  • Steady rest
  • Follow rest
  • Toolbox
  • Hand-held oiler
  • Accessory adjustment tools (wrenches, hex drivers, etc.)

Lathe

COA 6132 Precision Large-Capacity Gap-Bed CNC Lathe
Inches (Approx.) Metric
Old Price: $11,995
New Price: $10,495
Control System Siemens 808D Lathe Control
Swing Over Bed 12.99″ 330 mm
Swing Over Carriage 5.91″ 150 mm
Swing Through Gap 18.74″ 476 mm
Swing Length (Useful) 4.53″ 115 mm
Distance Between Centers 39.37″ 1,000 mm
Center Height 6.54″ 166 mm
Bed Width 7.36″ 187 mm
Bed Length 65.28″ 1,658 mm
Bed Height 11.42″ 290 mm
Spindle Bore 1.5″ 38 mm
Spindle Power 3 HP 2.2 kW
Spindle Nose D2-4 (ISO)
Spindle Taper in Nose M.T. 5
Range of Spindle Speeds (Frequency Converter) 70 to 2,000 RPM
Feeding Motors (X/Z) Siemens Servos
Min. Feeding Input Unit(X/Z) 0.000039″ 0.001 mm
Max. X-Axis Trave l5.91″ 150 mm
Max. Z-Axis Travel 31.5″ 800 mm
Electrical Tool Post 4-station automatic tool post
Tailstock Barrel Travel 3.74″ 95 mm
Taper of Tailstock Barrel M.T. 3
Dimensions (L × W × H) 79.9″ × 32.3″ × 54.4″ 2030 mm × 820 mm × 1382 mm
Net Weight (With Stand) 2,866 lbs. 1,300 kg
Included Accessories
  • Fully enclosed stand
  • 160 mm (6.3″) 3-jaw chuck
  • 4-position computer-controlled tool post
  • Cooling pump
  • Manual concentrating lubrication system
  • Worklamp
  • Pendant control (GSK)

Small RF45 Manual Mill

Square-Column Manual Benchtop Mill
Product Details Page
Standard Configuration With Lifting Motor
Old Price: $1,699 $1,925
New Price: $1,499 $1,725
Total Travel (Volumetric): 1,844 in3
X-Axis Travel (Longitudinal): 17″
Y-Axis Travel (Cross-Table): 7″
Z-Axis Travel (Quill Retracted): 15½”
Quill Travel: 4¾”
Table Work Surface (Linear): 31½” × 9½”
Table Work Surface (Areal): 299.25 in2
T-Slots: 3 Slots, ⅝” Each
Standard Spindle Speeds (RPM) 95, 175, 310, 450, 850, 1500
Spindle Taper: R8 (NT30 optional)
Power Requirements: 220-240V AC
Measurements/Dials: Inches
Column Type: Square
Ways: Ground dovetails
Weight: 650 lbs.
Required Floor Space Max Travel: 82″ H × 72″ W × 32″ D